A controlled reception pattern antenna (CRPA) combines multiple antenna elements with spatial processing. It reduces gain toward interference sources while preserving reception from legitimate GNSS satellites, helping a connected receiver continue producing usable positioning, navigation and timing data.
Why element count matters
Additional elements provide more spatial information and can support more simultaneous null directions. The right count still depends on platform size, power, protected bands and the acceptance scenario.
Suppression figures need context
A headline dB value is meaningful only with the interference waveform, input level, geometry, protected bands and measurement method stated. NOVA values are confirmed against the selected configuration and acceptance plan.
Integration determines field performance
Mounting location, ground plane, cable loss, nearby transmitters, radome materials and receiver behavior can materially change system performance.
CRPA front end vs standard GNSS antenna
| Selection point | Standard GNSS antenna | CRPA anti-jam front end |
|---|---|---|
| Antenna elements | Usually one | Multiple coordinated elements |
| Interference response | Filtering and receiver-level controls | Spatial nulling toward interference directions |
| Integration inputs | Band, gain, connector and mounting | Band, element count, processing, interface, SWaP and acceptance scenario |
| Evidence to request | RF and environmental specifications | Suppression conditions, simultaneous-null count, protected bands and system-boundary test results |
U.S. Coast Guard Navigation Center guidance distinguishes fixed-reception-pattern antennas from CRPAs and describes the CRPA role as reducing RF interference that would otherwise jam receiver operation. See the GPS user-equipment antenna guidance. Product selection still requires configuration-specific interface and test evidence.
Compare CRPA starting configurations
| Model | Array and direction capacity | Protected bands | Mass and power | Anti-spoof |
|---|---|---|---|---|
| NOVA-S65 | 4-channel; three interference directions | B1 / L1 / E1 | ≤130 g; ≤6 W | No |
| NOVA-H8 | 8 elements; seven interference directions | L1 / G1 | ≤720 g; ≤19 W | No |
| NOVA-H16 | 16 elements; fifteen interference directions | B1 / L1 / E1 | ≤1.25 kg; ≤25 W | No |
| NOVA-AS4 | 4-channel; three interference directions | B1 / L1 / E1 | ≤520 g; ≤13 W | Yes |
These published values describe standard starting configurations, not guaranteed platform results. Array size, direction capacity, protected bands, interface path and anti-spoof capability must all be checked independently against the quoted configuration.
Define the CRPA system boundary before requesting a quote
| RFQ item | Buyer input | Supplier evidence to request |
|---|---|---|
| Protected signal path | Constellations, bands and external receiver or integrated-receiver boundary | Block diagram, protected output and compatible interface definition |
| Interference case | Waveform, level, geometry and simultaneous directions | Stated test conditions, measurement point and configuration-specific result |
| Platform envelope | Dimensions, mass, voltage, power, mounting and cable path | Mechanical drawing, connector definition and installation constraints |
| Host behavior | Required RF, PVT, timing, alarm or status outputs | Interface specification and recorded receiver or host-system response |
| Acceptance | Authorized test facility, pass/fail limits and required records | Acceptance matrix linked to the quoted hardware and software configuration |
Use the NOVA product comparison to shortlist array scale, then review the testing and acceptance framework before fixing the platform architecture or requesting a final quotation.
Questions procurement teams ask
What is the difference between a CRPA array and a complete anti-jam system?
The array is the multi-element antenna assembly. A deployable anti-jam system also needs antenna electronics and spatial processing; it may provide a protected RF output to an external GNSS receiver or include its own receiver and navigation outputs.
Can a CRPA anti-jam system feed an existing GNSS receiver?
Some configurations provide a protected RF output intended for a compatible external receiver, while others integrate the receiver. Confirm protected bands, RF level, impedance, connector, power path and receiver compatibility before treating a CRPA as a retrofit.
How many interference directions can a CRPA suppress?
The published simultaneous-direction capacity depends on the complete array, channel and processing configuration. Do not infer it from element count alone. Compare the stated direction count and request results with the waveform, level, geometry, protected bands and measurement point defined.
Does a CRPA anti-jam system also provide anti-spoof protection?
Not necessarily. Spatial anti-jam processing addresses interference and signal availability; anti-spoof controls address false or manipulated navigation signals. A product should claim anti-spoof capability only when the method, alert behavior and separate acceptance evidence are stated.
What should an OEM include in a CRPA supplier RFQ?
Provide the platform, protected constellations and bands, receiver and output interface, simultaneous-interference requirement, size, mass, voltage, power, mounting and cable constraints, environmental needs, prototype quantity and measurable acceptance scenario.